Animated loader dots14ComingSoonAnimated loader dots
Argon

Argon (Ar)

An inert gas with unique properties used in a variety of industrial and analytical applications

Why use Air Products for your Argon requirements?​

ap0037-tanks
バルク液体配送と極低温貯蔵

当社の専門家チームが、安全で信頼性の高い液体供給から極低温タンクの設置まで、お客様のニーズを満たすお手伝いをします

ap0061-cryoease
CryoEase® Microbulk Solutions, Cost-Effective Alternative to Cylinders

It eliminates cylinder handling, reduces exposure to pressurized gases and reduces the number of deliveries

ap0062-manifolded-pack
High Pressure Cylinder 

We offer 200 and 300 bar packs for larger cylinder volume requirements

ap0063-bip-cylinder
BIP® Cylinder Technology

For the ultimate in gas purity

ap0064-integra-cylinder
Integra® Cylinder – Market Leading Technology

Smaller, lighter, easier to handle and often outlasts conventional cylinders

ap0065-portable-integra
Portable Integra® Cylinder 

Portable, safer, easier to handle and often outlasts conventional cylinders

Applications

Argon Mode of Supply Selector Tool

Whether an industrial, food, pharmaceutical or specialised requirement, use this guide to see the various options which may be suitable.

Argon Mode of Supply Selector Tool

推奨される供給モード

Photo of cylinders and cylinder packs

シリンダーまたはシリンダーパック

シリンダーは、少量のガスの従来の供給ソリューションです。 Air Productsは、さまざまな純度と圧力の幅広いガスとガス混合物を、単一のものからマニホールドパックまで、あらゆる種類のシリンダーサイズで供給しています。

Photo of a Cryoease tank at a customer facility.

CryoEase® マイクロバルク ソリューション

CryoEase® サービスは、現場に設置されたブレンダーを介して、純粋なガス、極低温液体、またはガス混合物の少量のユーザー向けの最新のコンセプトであり、統合された制御と柔軟な貯蔵タンクオプションを備えた特別に設計されたタンクローリーが提供されます。  

推奨される供給モード

Photo of cylinders and cylinder packs

シリンダーまたはシリンダーパック

シリンダーは、少量のガスの従来の供給ソリューションです。 Air Productsは、さまざまな純度と圧力の幅広いガスとガス混合物を、単一のものからマニホールドパックまで、あらゆる種類のシリンダーサイズで供給しています。

Photo of Air Products bulk gas trailer in front of an air separation plant.

バルク液体供給

トラックによる大量配送は、顧客の現場で極低温タンクの液体または高圧チューブのガスとして貯蔵される大量のガスを提供します。

推奨される供給モード

Photo of a Cryoease tank at a customer facility.

CryoEase® マイクロバルク ソリューション

CryoEase® サービスは、現場に設置されたブレンダーを介して、純粋なガス、極低温液体、またはガス混合物の少量のユーザー向けの最新のコンセプトであり、統合された制御と柔軟な貯蔵タンクオプションを備えた特別に設計されたタンクローリーが提供されます。  

Photo of Air Products bulk gas trailer in front of an air separation plant.

バルク液体供給

トラックによる大量配送は、顧客の現場で極低温タンクの液体または高圧チューブのガスとして貯蔵される大量のガスを提供します。

推奨される供給モード

Photo of cylinders and cylinder packs

シリンダーまたはシリンダーパック

シリンダーは、少量のガスの従来の供給ソリューションです。 Air Productsは、さまざまな純度と圧力の幅広いガスとガス混合物を、単一のものからマニホールドパックまで、あらゆる種類のシリンダーサイズで供給しています。

our recommended mode of supply

Photo of cylinders and cylinder packs

シリンダーまたはシリンダーパック

シリンダーは、少量のガスの従来の供給ソリューションです。 Air Productsは、さまざまな純度と圧力の幅広いガスとガス混合物を、単一のものからマニホールドパックまで、あらゆる種類のシリンダーサイズで供給しています。

Photo of a Cryoease tank at a customer facility.

CryoEase® マイクロバルク ソリューション

CryoEase® サービスは、現場に設置されたブレンダーを介して、純粋なガス、極低温液体、またはガス混合物の少量のユーザー向けの最新のコンセプトであり、統合された制御と柔軟な貯蔵タンクオプションを備えた特別に設計されたタンクローリーが提供されます。  

メンブレンシステム

PRISM® メンブレンセパレーターには、分子フィルターとして機能する数千本の非対称中空糸が含まれています。 高圧ガス混合物がセパレータに入ると、選択的透過の結果としてガス成分が分割されます。

Liquid tanks with adsorber vessels and a main air compressor

PSAシステム

当社独自のPRISM® 窒素圧力スイング吸着 (PSA) システムは、各顧客のアプリケーション要件に合わせてカスタマイズできる幅広いモデルで利用できます。 

推奨される供給方法

Onsite gas production plant within a fenced in enclosure

VSA酸素発生器

オンサイト生産が中規模から大規模酸素要件に最適な供給オプションとなることがあります。 電力効率の高い真空スイング吸着発電機は、現場での柔軟な供給ソリューションを提供します。オンサイト契約に基づいて酸素を購入すると、Air Productsを信頼する50か国以上の顧客に加わることになります。

ASUs at Hull with LOX/Lin and Argon tanks

大型極低温システム

空気分離プラントは、1日あたりのガス需要が高いお客様向けに特に構築されています。電力効率が高いため、窒素やアルゴンなどの他のガスを共同生成する可能性がある柔軟なオンサイト供給ソリューションを提供します。  

推奨される供給方法

Photo of Air Products bulk gas trailer in front of an air separation plant.

バルク液体供給

トラックによる大量配送は、顧客の現場で極低温タンクの液体または高圧チューブのガスとして貯蔵される大量のガスを提供します。

Onsite gas production plant within a fenced in enclosure

VSA酸素発生器

オンサイト生産が中規模から大規模酸素要件に最適な供給オプションとなることがあります。 電力効率の高い真空スイング吸着発電機は、現場での柔軟な供給ソリューションを提供します。オンサイト契約に基づいて酸素を購入すると、Air Productsを信頼する50か国以上の顧客に加わることになります。

推奨される供給方法

チューブトレーラー

ガスのバルク配送と貯蔵システムは、高純度水素の安全で信頼性の高い供給オプションを提供します。

Nitrogen truck at Air Products campus, Allentown, PA.

液体水素

Air Productsは、貯蔵および移送施設のネットワークのおかげで、さまざまな純度の液体水素とさまざまな供給モードを世界中に提供しています。

推奨される供給方法

Photo of cylinders and cylinder packs

シリンダーまたはシリンダーパック

シリンダーは、少量のガスの従来の供給ソリューションです。 Air Productsは、さまざまな純度と圧力の幅広いガスとガス混合物を、単一のものからマニホールドパックまで、あらゆる種類のシリンダーサイズで供給しています。

Photo of a Cryoease tank at a customer facility.

CryoEase® マイクロバルク ソリューション

CryoEase® サービスは、現場に設置されたブレンダーを介して、純粋なガス、極低温液体、またはガス混合物の少量のユーザー向けの最新のコンセプトであり、統合された制御と柔軟な貯蔵タンクオプションを備えた特別に設計されたタンクローリーが提供されます。  

Photo of Air Products bulk gas trailer in front of an air separation plant.

バルク液体供給

トラックによる大量配送は、顧客の現場で極低温タンクの液体または高圧チューブのガスとして貯蔵される大量のガスを提供します。

メンブレンシステム

PRISM® メンブレンセパレーターには、分子フィルターとして機能する数千本の非対称中空糸が含まれています。 高圧ガス混合物がセパレータに入ると、選択的透過の結果としてガス成分が分割されます。

推奨される供給方法

Experis mixture cylinders

シリンダーまたはシリンダーパック

シリンダーは、少量のガスの従来の供給ソリューションです。 Air Productsは、さまざまな純度と圧力の幅広いガスとガス混合物を、単一のものからマニホールドパックまで、あらゆる種類のシリンダーサイズで供給しています。

推奨される供給方法

Experis mixture cylinders

シリンダーまたはシリンダーパック

シリンダーは、少量のガスの従来の供給ソリューションです。 Air Productsは、さまざまな純度と圧力の幅広いガスとガス混合物を、単一のものからマニホールドパックまで、あらゆる種類のシリンダーサイズで供給しています。

チューブトレーラー

ガスのバルク配送と貯蔵システムは、高純度水素の安全で信頼性の高い供給オプションを提供します。

推奨される供給方法

Photo of cylinders and cylinder packs

シリンダーまたはシリンダーパック

シリンダーは、少量のガスの従来の供給ソリューションです。 Air Productsは、さまざまな純度と圧力の幅広いガスとガス混合物を、単一のものからマニホールドパックまで、あらゆる種類のシリンダーサイズで供給しています。

Photo of a Cryoease tank at a customer facility.

CryoEase® マイクロバルク ソリューション

CryoEase® サービスは、現場に設置されたブレンダーを介して、純粋なガス、極低温液体、またはガス混合物の少量のユーザー向けの最新のコンセプトであり、統合された制御と柔軟な貯蔵タンクオプションを備えた特別に設計されたタンクローリーが提供されます。  

Photo of Air Products bulk gas trailer in front of an air separation plant.

バルク液体供給

トラックによる大量配送は、顧客の現場で極低温タンクの液体または高圧チューブのガスとして貯蔵される大量のガスを提供します。

推奨される供給方法

Photo of Air Products bulk gas trailer in front of an air separation plant.

バルク液体供給

トラックによる大量配送は、顧客の現場で極低温タンクの液体または高圧チューブのガスとして貯蔵される大量のガスを提供します。

メンブレンシステム

PRISM® メンブレンセパレーターには、分子フィルターとして機能する数千本の非対称中空糸が含まれています。 高圧ガス混合物がセパレータに入ると、選択的透過の結果としてガス成分が分割されます。

Liquid tanks with adsorber vessels and a main air compressor

PSAシステム

当社独自のPRISM® 窒素圧力スイング吸着 (PSA) システムは、各顧客のアプリケーション要件に合わせてカスタマイズできる幅広いモデルで利用できます。 

推奨される供給方法

Photo of a Cryoease tank at a customer facility.

CryoEase® マイクロバルク ソリューション

CryoEase® サービスは、現場に設置されたブレンダーを介して、純粋なガス、極低温液体、またはガス混合物の少量のユーザー向けの最新のコンセプトであり、統合された制御と柔軟な貯蔵タンクオプションを備えた特別に設計されたタンクローリーが提供されます。  

Photo of Air Products bulk gas trailer in front of an air separation plant.

バルク液体供給

トラックによる大量配送は、顧客の現場で極低温タンクの液体または高圧チューブのガスとして貯蔵される大量のガスを提供します。

Liquid tanks with adsorber vessels and a main air compressor

PSAシステム

当社独自のPRISM® 窒素圧力スイング吸着 (PSA) システムは、各顧客のアプリケーション要件に合わせてカスタマイズできる幅広いモデルで利用できます。 

推奨される供給方法

Photo of a Cryoease tank at a customer facility.

CryoEase® マイクロバルク ソリューション

CryoEase® サービスは、現場に設置されたブレンダーを介して、純粋なガス、極低温液体、またはガス混合物の少量のユーザー向けの最新のコンセプトであり、統合された制御と柔軟な貯蔵タンクオプションを備えた特別に設計されたタンクローリーが提供されます。  

Photo of Air Products bulk gas trailer in front of an air separation plant.

バルク液体供給

トラックによる大量配送は、顧客の現場で極低温タンクの液体または高圧チューブのガスとして貯蔵される大量のガスを提供します。

メンブレンシステム

PRISM® メンブレンセパレーターには、分子フィルターとして機能する数千本の非対称中空糸が含まれています。 高圧ガス混合物がセパレータに入ると、選択的透過の結果としてガス成分が分割されます。

Liquid tanks with adsorber vessels and a main air compressor

PSAシステム

当社独自のPRISM® 窒素圧力スイング吸着 (PSA) システムは、各顧客のアプリケーション要件に合わせてカスタマイズできる幅広いモデルで利用できます。 

おすすめの供給方法

Photo of Air Products bulk gas trailer in front of an air separation plant.

バルク液体供給

トラックによる大量配送は、顧客の現場で極低温タンクの液体または高圧チューブのガスとして貯蔵される大量のガスを提供します。

Gen Gases HPN in Shanghai

極低温システム

PRISM® 極低温オンサイト システムは、さまざまな用途にガス状の窒素と酸素、およびアルゴンを提供します。

推奨される供給モード

ASUs at Hull with LOX/Lin and Argon tanks

大型極低温システム

空気分離プラントは、1日あたりのガス需要が高いお客様向けに特に構築されています。電力効率が高いため、窒素やアルゴンなどの他のガスを共同生成する可能性がある柔軟なオンサイト供給ソリューションを提供します。  

推奨される供給方法

Photo of Air Products bulk gas trailer in front of an air separation plant.

バルク液体供給

トラックによる大量配送は、顧客の現場で極低温タンクの液体または高圧チューブのガスとして貯蔵される大量のガスを提供します。

Liquid tanks with adsorber vessels and a main air compressor

PSAシステム

当社独自のPRISM® 窒素圧力スイング吸着 (PSA) システムは、各顧客のアプリケーション要件に合わせてカスタマイズできる幅広いモデルで利用できます。 

our recommended mode of supply

Photo of Air Products bulk gas trailer in front of an air separation plant.

バルク液体供給

トラックによる大量配送は、顧客の現場で極低温タンクの液体または高圧チューブのガスとして貯蔵される大量のガスを提供します。

Ask the Expert

John Dwyer
John Dwyer

Microbulk Applications Engineer, North America

Is my gas purity adequate for my process? 

Industrial gases (such as nitrogen, hydrogen, and argon) for furnace atmospheres are characterized by their very high purity (>99.995%). Typical impurity levels are much less than 10 parts per million by volume (ppmv) oxygen and less than 3 ppmv moisture (<– 90° F dew point). This purity is typically adequate for many processes involving a wide array of materials. Some materials, though, due to their high reactivity, may require additional purification to reach even lower levels of impurity, especially with gases supplied via bulk or tube trailer supply modes. Some facilities install in-line purifiers as an added precaution against impurities picked up from the houseline. In-line purification typically involves the removal of oxygen and moisture. Sometimes with argon supply, it is necessary to remove trace nitrogen impurities. The choice of purifier is dependent on the gas and the type and amount of impurities to be removed.

Read More Link Text

Welding Gas Selector Tool

Find the most suitable welding gas for all your welding needs

Welding Gas Selector Tool

Our Best Gas

Ferromaxx® Plus

M20 ArHeC20 / 12 Ferromaxx® Plus weld process gas meeting the requirements of ISO14175:M20, contains 12% Carbon dioxide and 20% Helium in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

We Also Recommend

Ferromaxx 15

Ferromaxx® 15

M24 ArCO15 / 2.5 Ferromaxx® 15 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 15% Carbon dioxide in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

Ferromaxx 7

Ferromaxx® 7

M24 ArCO7 / 2.5 Ferromaxx® 7 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 7% Carbon dioxide in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too. 

Also Suitable

M21ArC20

80% Ar / 2% CO2 M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon dioxide in Argon. Ideal for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

M24ArCO15-2

M24ArCO15/2

83% Ar / 15% CO2 / 2% O2 M24ArCO15/2 weld process gas meeting the requirements of ISO14175:M24, contains 2% Oxygen and 15% Carbon dioxide in Argon. Ideal for MAG welding of carbon steels. Supplied in a 47 litre steel cylinder at 200 bar. 

M26ArCO20-2

M26ArCO20/2

78% Ar / 20% CO2 / 2% O2 M26ArCO20/2 weld process gas meeting the requirements of ISO14175:M26, contains 2% Oxygen and 20% Carbon dioxide in Argon. Ideal for MAG welding of carbon steels. Supplied in a 47 litre steel cylinder at 200 bar. 

Used in Certain Applications

Carbon Dioxide

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only. Supplied in a 47 litre steel cylinder containing 34 kg.

M31ArCO50

M31ArCO50

50% Ar / 50% CO2 M31ArC50 weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon dioxide in Argon. Ideal for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes. Supplied in a 47 litre steel cylinder at 90 bar.

Our Best Gas

Ferromaxx 15

Ferromaxx® 15

M24 ArCO15 / 2.5 Ferromaxx® 15 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 15% Carbon dioxide in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

Also Suitable

Ferromaxx® Plus

M20 ArHeC20 / 12 Ferromaxx® Plus weld process gas meeting the requirements of ISO14175:M20, contains 12% Carbon dioxide and 20% Helium in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

M21ArC20

80% Ar / 2% CO2 M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon dioxide in Argon. Ideal for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

Used in Certain Applications

Carbon Dioxide

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only. Supplied in a 47 litre steel cylinder containing 34 kg.

M31ArCO50

M31ArCO50

50% Ar / 50% CO2 M31ArC50 weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon dioxide in Argon. Ideal for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes. Supplied in a 47 litre steel cylinder at 90 bar.

Our Best Gas

Ferromaxx 7

Ferromaxx® 7

M24 ArCO7 / 2.5 Ferromaxx® 7 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 7% Carbon dioxide in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too. 

We Also Recommend

Ferromaxx 15

Ferromaxx® 15

M24 ArCO15 / 2.5 Ferromaxx® 15 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 15% Carbon dioxide in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

Also Suitable

M14ArCO5-2

M14ArCO5/2

93% Ar / 5% CO2 / 2% O2 M14ArCO5/2 weld process gas meeting the requirements of ISO14175:M14, contains 2% Oxygen and 5% Carbon dioxide in Argon. Ideal for MAG welding of carbon steels. Supplied in a 47 litre steel cylinder at 200 bar. 

M20ArC8

M20ArC8

92% Ar / 8% CO2 M20ArC8 weld process gas meeting the requirements of ISO14175:M20, contains 8% Carbon dioxide in Argon. Ideal for MAG welding of carbon steels. Supplied in a 47 litre steel cylinder at 200 bar. 

M24ArCO15-2

M24ArCO15/2

83% Ar / 15% CO2 / 2% O2 M24ArCO15/2 weld process gas meeting the requirements of ISO14175:M24, contains 2% Oxygen and 15% Carbon dioxide in Argon. Ideal for MAG welding of carbon steels. Supplied in a 47 litre steel cylinder at 200 bar. 

Used in Certain Applications

Carbon Dioxide

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only. Supplied in a 47 litre steel cylinder containing 34 kg.

Our Best Gas

Ferromaxx 15

Ferromaxx® 15

M24 ArCO15 / 2.5 Ferromaxx® 15 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 15% Carbon dioxide in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

Also Suitable

Ferromaxx® Plus

M20 ArHeC20 / 12 Ferromaxx® Plus weld process gas meeting the requirements of ISO14175:M20, contains 12% Carbon dioxide and 20% Helium in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

M14ArCO5-2

M14ArCO5/2

93% Ar / 5% CO2 / 2% O2 M14ArCO5/2 weld process gas meeting the requirements of ISO14175:M14, contains 2% Oxygen and 5% Carbon dioxide in Argon. Ideal for MAG welding of carbon steels. Supplied in a 47 litre steel cylinder at 200 bar. 

M20ArC8

M20ArC8

92% Ar / 8% CO2 M20ArC8 weld process gas meeting the requirements of ISO14175:M20, contains 8% Carbon dioxide in Argon. Ideal for MAG welding of carbon steels. Supplied in a 47 litre steel cylinder at 200 bar. 

M24ArCO15-2

M24ArCO15/2

83% Ar / 15% CO2 / 2% O2 M24ArCO15/2 weld process gas meeting the requirements of ISO14175:M24, contains 2% Oxygen and 15% Carbon dioxide in Argon. Ideal for MAG welding of carbon steels. Supplied in a 47 litre steel cylinder at 200 bar. 

Used in Certain Applications

Carbon Dioxide

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only. Supplied in a 47 litre steel cylinder containing 34 kg.

Our Best Gas

Ferromaxx® Plus

M20 ArHeC20 / 12 Ferromaxx® Plus weld process gas meeting the requirements of ISO14175:M20, contains 12% Carbon dioxide and 20% Helium in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

We Also Recommend

Ferromaxx 15

Ferromaxx® 15

M24 ArCO15 / 2.5 Ferromaxx® 15 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 15% Carbon dioxide in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

Ferromaxx 7

Ferromaxx® 7

M24 ArCO7 / 2.5 Ferromaxx® 7 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 7% Carbon dioxide in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too. 

Also Suitable

M21ArC20

80% Ar / 2% CO2 M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon dioxide in Argon. Ideal for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

M24ArCO15-2

M24ArCO15/2

83% Ar / 15% CO2 / 2% O2 M24ArCO15/2 weld process gas meeting the requirements of ISO14175:M24, contains 2% Oxygen and 15% Carbon dioxide in Argon. Ideal for MAG welding of carbon steels. Supplied in a 47 litre steel cylinder at 200 bar. 

M26ArCO20-2

M26ArCO20/2

78% Ar / 20% CO2 / 2% O2 M26ArCO20/2 weld process gas meeting the requirements of ISO14175:M26, contains 2% Oxygen and 20% Carbon dioxide in Argon. Ideal for MAG welding of carbon steels. Supplied in a 47 litre steel cylinder at 200 bar. 

Used in Certain Applications

Carbon Dioxide

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only. Supplied in a 47 litre steel cylinder containing 34 kg.

M31ArCO50

M31ArCO50

50% Ar / 50% CO2 M31ArC50 weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon dioxide in Argon. Ideal for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes. Supplied in a 47 litre steel cylinder at 90 bar.

Our Best Gas

Ferromaxx 15

Ferromaxx® 15

M24 ArCO15 / 2.5 Ferromaxx® 15 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 15% Carbon dioxide in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

We Also Recommend

Ferromaxx® Plus

M20 ArHeC20 / 12 Ferromaxx® Plus weld process gas meeting the requirements of ISO14175:M20, contains 12% Carbon dioxide and 20% Helium in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

Also Suitable

M21ArC20

80% Ar / 2% CO2 M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon dioxide in Argon. Ideal for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

M24ArCO15-2

M24ArCO15/2

83% Ar / 15% CO2 / 2% O2 M24ArCO15/2 weld process gas meeting the requirements of ISO14175:M24, contains 2% Oxygen and 15% Carbon dioxide in Argon. Ideal for MAG welding of carbon steels. Supplied in a 47 litre steel cylinder at 200 bar. 

M26ArCO20-2

M26ArCO20/2

78% Ar / 20% CO2 / 2% O2 M26ArCO20/2 weld process gas meeting the requirements of ISO14175:M26, contains 2% Oxygen and 20% Carbon dioxide in Argon. Ideal for MAG welding of carbon steels. Supplied in a 47 litre steel cylinder at 200 bar. 

Used in Certain Applications

Carbon Dioxide

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only. Supplied in a 47 litre steel cylinder containing 34 kg.

M31ArCO50

M31ArCO50

50% Ar / 50% CO2 M31ArC50 weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon dioxide in Argon. Ideal for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes. Supplied in a 47 litre steel cylinder at 90 bar.

Our Best Gas

Ferromaxx 15

Ferromaxx® 15

M24 ArCO15 / 2.5 Ferromaxx® 15 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 15% Carbon dioxide in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

We Also Recommend

Ferromaxx® Plus

M20 ArHeC20 / 12 Ferromaxx® Plus weld process gas meeting the requirements of ISO14175:M20, contains 12% Carbon dioxide and 20% Helium in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

Also Suitable

Ferromaxx 7

Ferromaxx® 7

M24 ArCO7 / 2.5 Ferromaxx® 7 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 7% Carbon dioxide in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too. 

M14ArCO5-2

M14ArCO5/2

93% Ar / 5% CO2 / 2% O2 M14ArCO5/2 weld process gas meeting the requirements of ISO14175:M14, contains 2% Oxygen and 5% Carbon dioxide in Argon. Ideal for MAG welding of carbon steels. Supplied in a 47 litre steel cylinder at 200 bar. 

M20ArC8

M20ArC8

92% Ar / 8% CO2 M20ArC8 weld process gas meeting the requirements of ISO14175:M20, contains 8% Carbon dioxide in Argon. Ideal for MAG welding of carbon steels. Supplied in a 47 litre steel cylinder at 200 bar. 

M24ArCO15-2

M24ArCO15/2

83% Ar / 15% CO2 / 2% O2 M24ArCO15/2 weld process gas meeting the requirements of ISO14175:M24, contains 2% Oxygen and 15% Carbon dioxide in Argon. Ideal for MAG welding of carbon steels. Supplied in a 47 litre steel cylinder at 200 bar. 

Used in Certain Applications

Carbon Dioxide

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only. Supplied in a 47 litre steel cylinder containing 34 kg.

Our Best Gas

Ferromaxx® Plus

M20 ArHeC20 / 12 Ferromaxx® Plus weld process gas meeting the requirements of ISO14175:M20, contains 12% Carbon dioxide and 20% Helium in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

We Also Recommend

Ferromaxx 7

Ferromaxx® 7

M24 ArCO7 / 2.5 Ferromaxx® 7 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 7% Carbon dioxide in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too. 

Ferromaxx 15

Ferromaxx® 15

M24 ArCO15 / 2.5 Ferromaxx® 15 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 15% Carbon dioxide in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

Also Suitable

M14ArCO5-2

M14ArCO5/2

93% Ar / 5% CO2 / 2% O2 M14ArCO5/2 weld process gas meeting the requirements of ISO14175:M14, contains 2% Oxygen and 5% Carbon dioxide in Argon. Ideal for MAG welding of carbon steels. Supplied in a 47 litre steel cylinder at 200 bar. 

M20ArC8

M20ArC8

92% Ar / 8% CO2 M20ArC8 weld process gas meeting the requirements of ISO14175:M20, contains 8% Carbon dioxide in Argon. Ideal for MAG welding of carbon steels. Supplied in a 47 litre steel cylinder at 200 bar. 

M24ArCO15-2

M24ArCO15/2

83% Ar / 15% CO2 / 2% O2 M24ArCO15/2 weld process gas meeting the requirements of ISO14175:M24, contains 2% Oxygen and 15% Carbon dioxide in Argon. Ideal for MAG welding of carbon steels. Supplied in a 47 litre steel cylinder at 200 bar. 

Used in Certain Applications

Carbon Dioxide

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only. Supplied in a 47 litre steel cylinder containing 34 kg.

our best gas

Alumaxx Plus

Alumaxx® Plus

I3 ArHe30 Alumaxx® Plus weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too. 

We also recommend

I3ArHe30

I3ArHe30

70% Ar / 30% He I3ArHe30 weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar. 

also suitable

Argon Technical Grade

Argon

I1 (100% Ar) Argon Technical grade 4.8 (99.998%). Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminum and other reactive materials. Supplied in a 10 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too. 

I3ArHe50

I3ArHe50

50% Ar / 50% He I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.

I3HeAr25

I3HeAr25

75% He / 25% Ar I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.

Our Best Gas

Alumaxx Plus

Alumaxx® Plus

I3 ArHe30 Alumaxx® Plus weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too. 

We Also Recommend

Argon Technical Grade

Argon

I1 (100% Ar) Argon Technical grade 4.8 (99.998%). Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminum and other reactive materials. Supplied in a 10 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too. 

I3ArHe30

I3ArHe30

70% Ar / 30% He I3ArHe30 weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar. 

Also Suitable

I3ArHe50

I3ArHe50

50% Ar / 50% He I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.

I3HeAr25

I3HeAr25

75% He / 25% Ar I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.

Our best gas

Alumaxx Plus

Alumaxx® Plus

I3 ArHe30 Alumaxx® Plus weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too. 

We also recommend

I3ArHe30

I3ArHe30

70% Ar / 30% He I3ArHe30 weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar. 

also suitable

Argon Technical Grade

Argon

I1 (100% Ar) Argon Technical grade 4.8 (99.998%). Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminum and other reactive materials. Supplied in a 10 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too. 

I3ArHe50

I3ArHe50

50% Ar / 50% He I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.

I3HeAr25

I3HeAr25

75% He / 25% Ar I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.

Used in Certain Applications

Helium Technical Grade 300 Bar

Helium

I2 (100% He) Helium Technical grade 4.6 (99.996%). An inert gas, technical Helium is used for lifting (airships and balloons), as well as for leak detection, optical fibre production, and as a shielding gas for welding. It is the preferred shielding gas for high power laser welding. Its high thermal conductivity produces welds with an excellent aspect ratio. Its high ionisation potential results in good plasma suppression and high weld speeds. Supplied in a 47 litre steel cylinder at 300 bar.

Backing Gas - Our Best Gas

Argon Technical Grade

Argon

I1 (100% Ar) Argon Technical grade 4.8 (99.998%). Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminum and other reactive materials. Supplied in a 10 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too. 

Our best gas

Alumaxx Plus

Alumaxx® Plus

I3 ArHe30 Alumaxx® Plus weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too. 

We also recommend

Argon Technical Grade

Argon

I1 (100% Ar) Argon Technical grade 4.8 (99.998%). Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminum and other reactive materials. Supplied in a 10 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too. 

I3ArHe30

I3ArHe30

70% Ar / 30% He I3ArHe30 weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar. 

Backing Gas - Our Best Gas

Argon Technical Grade

Argon

I1 (100% Ar) Argon Technical grade 4.8 (99.998%). Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminum and other reactive materials. Supplied in a 10 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too. 

Our best gas

Ferromaxx® Plus

M20 ArHeC20 / 12 Ferromaxx® Plus weld process gas meeting the requirements of ISO14175:M20, contains 12% Carbon dioxide and 20% Helium in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

We also recommend

M21ArC20

80% Ar / 2% CO2 M21ArC20 weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon dioxide in Argon. Ideal for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

also suitable

Ferromaxx 15

Ferromaxx® 15

M24 ArCO15 / 2.5 Ferromaxx® 15 weld process gas meeting the requirements of ISO14175:M24, contains 2.5% Oxygen and 15% Carbon dioxide in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too.

M24ArCO15-2

M24ArCO15/2

83% Ar / 15% CO2 / 2% O2 M24ArCO15/2 weld process gas meeting the requirements of ISO14175:M24, contains 2% Oxygen and 15% Carbon dioxide in Argon. Ideal for MAG welding of carbon steels. Supplied in a 47 litre steel cylinder at 200 bar. 

M26ArCO20-2

M26ArCO20/2

78% Ar / 20% CO2 / 2% O2 M26ArCO20/2 weld process gas meeting the requirements of ISO14175:M26, contains 2% Oxygen and 20% Carbon dioxide in Argon. Ideal for MAG welding of carbon steels. Supplied in a 47 litre steel cylinder at 200 bar. 

used in certain applications

Carbon Dioxide

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only. Supplied in a 47 litre steel cylinder containing 34 kg.

M31ArCO50

M31ArCO50

50% Ar / 50% CO2 M31ArC50 weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon dioxide in Argon. Ideal for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes. Supplied in a 47 litre steel cylinder at 90 bar.

Our best gas

Argon Technical Grade

Argon

I1 (100% Ar) Argon Technical grade 4.8 (99.998%). Known for its unique inerting properties. A welding gas meeting the requirements of I1 according to ISO14175, for TIG welding of all weldable metals and alloys and MIG welding of aluminum and other reactive materials. Supplied in a 10 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too. 

We also recommend

Alumaxx Plus

Alumaxx® Plus

I3 ArHe30 Alumaxx® Plus weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of Aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon. Supplied in a 30 litre Integra® cylinder at 300 bar. Integra® cylinders are safer, smaller and lighter. The Integra® cylinder is designed to be used with a choice of integrated flow optimisers (available separately) which ensure optimum weld results whilst reducing excessive gas usage too. 

I3ArHe30

I3ArHe30

70% Ar / 30% He I3ArHe30 weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar. 

used in certain applications

I3ArHe50

I3ArHe50

50% Ar / 50% He I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.

I3HeAr25

I3HeAr25

75% He / 25% Ar I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Ideal for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials. Supplied in a 47 litre steel cylinder at 200 bar.